ULTIMATE PERFORMANCE
Click below     -----     Ebay store    ----- Click below
3000gt / Stealth Aluminum Intake Plenum
Our custom short runner aluminum intake plenum is designed from 6061 aluminum with slightly shorter then stock intake runners and a larger surge tank to increase performance on both the high and low ends of the rev range.  The compact runner design also allows easy access to the rear bank of spark plugs withouth the need to remove the plenum.  Each runner is flared inside the surge tank with velocity stacks to increase airflow on non turbocharged cars.

Comes with all hardware needed and can be made to accomodate up to a 90mm throttle body and single turbo setups.
$650 shipped

3000gt / Stealth Direct port nitrous induction plate
Nitrous is one of the single most effective and easiest ways to add additional horsepower to your car.  With our new direct port nitrous plates you can easily hook up a fogger or wet system and port it directly into your intake runners without have to drill or modify your plenum.  With our nitrous plates you not only get the added benifit of nitrous, but they also double as a 1/2" plenum spacer to help keep your cars intake charge nice a cool. 

Machined from 6061 aluminum and port matched to the upper and lower intake runners. Comes with all required hardware.
$200 shipped
3000gt / Stealth Aluminum Fuel rails
As every engines power grows so must the fuel you feed it.  With our new aluminum fuel rails you can easily add more fuel to your injectors.  These rails flow 40% more fuel than the stock units and are a simple direct bolt in replacement (proper fuel lines and fittings are required). 

Rails are available with either 6an, 8an, or 10an fittings. Please specify which size fittings you would like when you order.
$200 shipped
3000GT / Stealth
3000gt / Stealth Short throw shifter
Precise, tight, controlled shifts are what every 3000gt & stealth needs.  However, the stock unit sucks.  Enter... the Ultimate Performance short throw.  Made from laser cut CAD designed steel and professionally welded with aircraft quality welds, these shifters are the best your money can buy.

Reduces shift throw by an average of 40% and lowers knob hieght by 1-2 inches.  Comes complete, ready to install with all required hardware.  Accepts stock shift knob as well as aftermarket knobs.
$150 shipped

3000gt / Stealth Front strut bar     Single or Dual
Increase your cars handling and cornering capabilities instantly by adding front and rear strut tower bars. These bars help increase the cars rigidity and decrease body flex when cornering. New design offers full-circle end brackets and 4-bolt mounting between the bars and brackets on all bars for increased strength. NOTE: The 96+ cars with the sensor on top of the plenum may have fitment issues if your motor mounts are not properly supporting the engine - the bar clears the sensor with plenty of space, but excessive engine movement can cause it to contact the strut bar and potentially damage the sensor.
$100 shipped
3000gt / Stealth Rear strut bar     Single or Dual
Increase your cars handling and cornering capabilities instantly by adding front and rear strut tower bars. These bars help increase the cars rigidity and decrease body flex when cornering. New design offers full-circle end brackets and 4-bolt mounting between the bars and brackets on all bars for increased strength.

The plastic strut tower access panels may need to be slightly modified in order to allow clearance of the strut bar brackets.  A samll 1/4" tall slit needs to be removed from the middle of the screw mounts.  once the panels are reinstalled the slit is almost unnoticable.
$100 shipped
3000gt / Stealth Front strut bar  -  3"
Increase your cars handling and cornering capabilities instantly by adding front and rear strut tower bars. These bars help increase the cars rigidity and decrease body flex when cornering. New design offers full-circle end brackets and 4-bolt mounting between the bars and brackets on all bars for increased strength. NOTE: The 96+ cars with the sensor on top of the plenum may have fitment issues if your motor mounts are not properly supporting the engine - the bar clears the sensor with plenty of space, but excessive engine movement can cause it to contact the strut bar and potentially damage the sensor.
$150 shipped
3000gt / Stealth Rear strut bar  -  3"
Increase your cars handling and cornering capabilities instantly by adding front and rear strut tower bars. These bars help increase the cars rigidity and decrease body flex when cornering. New design offers full-circle end brackets and 4-bolt mounting between the bars and brackets on all bars for increased strength.

The plastic strut tower access panels may need to be removed in order to allow clearance of the strut bar brackets.  A samll 1/2" tall slit needs to be removed from the middle of the screw mounts.  once the panels are reinstalled the slit is almost unnoticable.
$150 shipped
Fittings
Bar style
Fitting type
Bar style
3000gt / Stealth Engine dress up covers kit
Now made with polished stainless steel!! This is a 6-piece kit of covers to enhance your engine bay - concealing those ugly black plastic fuse boxes and some of the miscellaneous wiring. The covers are for main fuse/relay box (upper left), AC relay box (lower left), cruise control throttle cable cover (mid right), plenum harnesses (upper right) and injector wires (bottom). The fuse/relay covers press on over the existing plastic covers, while the other peices are add-ons or replace (throttle cable box) existing covers. This kit is a great way to enhance your engine when you show it off!

Also available in brushed aluminum. Email me for Pricing and details
Finish
$175 shipped
Bar style
Bar style
3000gt / Stealth Door sills
Now made with polished stainless steel!! Available with and without logos. Made from very durable stainless steel and aluminum. These sills are a great way to cover your ugly factory sills. Makes a really nice addition to a show car.

Email me for Pricing and details on aluminum sills.

SPYDER and GTO logos are order based items. Please allow additonal time for shipping.
options
$100 shipped
3000gt / Stealth Front strut bar machined
Increase your cars handling and cornering capabilities instantly by adding front and rear strut tower bars. These bars help increase the cars rigidity and decrease body flex when cornering. New design offers full-circle end brackets and 4-bolt mounting between the bars and brackets on all bars for increased strength. NOTE: The 96+ cars with the sensor on top of the plenum may have fitment issues if your motor mounts are not properly supporting the engine - the bar clears the sensor with plenty of space, but excessive engine movement can cause it to contact the strut bar and potentially damage the sensor.
$150 shipped
3000gt / Stealth Rear strut bar machined
Increase your cars handling and cornering capabilities instantly by adding front and rear strut tower bars. These bars help increase the cars rigidity and decrease body flex when cornering. New design offers full-circle end brackets and 4-bolt mounting between the bars and brackets on all bars for increased strength.

The plastic strut tower access panels may need to be slightly modified in order to allow clearance of the strut bar brackets.  A samll 1/4" tall slit needs to be removed from the middle of the screw mounts.  once the panels are reinstalled the slit is almost unnoticable.
$150 shipped

Precise, tight, controlled shifts are what every 3000gt & stealth needs.  Esspecially at the track. Designed for the  hardcore racer, our new Autocross shifter is made from the same high quality materials and components as our famous short shifter but with a taller shift lever to allow for a more accurate, easier to grab shift knob hieght. Made from laser cut CAD designed steel and professionally welded with aircraft quality welds, these shifters are the best your money can buy.

Reduces shift throw by an average of 40%.  Comes complete, ready to install with all required hardware.  Accepts stock shift knob as well as aftermarket knobs.
3000gt / Stealth AutoCross shifter
$150 shipped

3000gt / Stealth Spark plug covers
Now made with polished stainless steel!! Available with and without logos. Made from very durable stainless steel and aluminum. Replaces or covers up your factory plug cover. Looks great witha  polished intake plenum or polished intercooler kit. Makes a really nice addition to a show car.

Email me for Pricing and details on aluminum plug covers.

SPYDER and GTO logos are order based items. Please allow additonal time for shipping.
options
$100 shipped
3000gt / Stealth Cold air intake box
Cooler air means more hp. By adding a cold air induction box to your car you can drastically reduce engine intake temps by an average of 40 degrees.  This decrease in intake air temperature results in an average hp increase of about 5hp on most applications.  More power can be gained depending on your engines state of tune.  Made from high quality 6061 aluminum for light wieght and laser cut CAD designed for a perfect fit.

Intake box is available with a filter. Please email me for Pricing and details.
$100 shipped
3000gt / Stealth Cold air wall
Cooler air means more hp. By adding a cold air induction wall to your car you can drastically reduce engine intake temps by an average of 40 degrees.  This decrease in intake air temperature results in an average hp increase of about 5hp on most applications.  More power can be gained depending on your engines state of tune.  Made from high quality 6061 aluminum for light wieght and laser cut CAD designed for a perfect fit.

Intake wall is available with a filter. Please email me for Pricing and details
$75 shipped